PRLog (Press Release)– Jul 05, 2011– The PathWay® Model 7365 Dual Channel RJ45/48 T1 Interface A/B Switch with Contact Closure, Telnet and GUI allows the user the capability of sharing a single port interface device connected to the COMMON port among two other devices connected to the A and B ports, for each channel, with remote access functionality.
Remote Control access can be accomplished using an Ethernet 10/100Base-T connection and either Telnet commands or graphical user interface. The unit can also be controlled via dry contact closure logic through the Rear Panel DB9 Remote Port.
Features: - Each channel allows access to two RJ45/48 T1 networks from one COMMON network or device. - The switch ports are transparent to all data. - All (8) pins of the RJ45/48 interface are switched. - Simultaneous control of both channels. - Front panel pushbutton control. - Switch maintains position on power loss and continues to pass data. - Upon power up, unit switches based on state of contact closure. - Control of the switch position from a 10/100-Base-T LAN Ethernet environment. - Remote Control Telnet command interface or Graphical User Interface that allow the user to control switch position, lockout front panel operations and obtain switch status. - Remote Contact Closure control provides dry contact logic to allow the control of the switch best rc helicopter buy sell market place position and lockout state of front panel operations. - Front panel LED's display current position and power status.
Software Features: - Access User Interface via standard web browser. - Easy to use, simple point and click operation. - Remotely access to control or monitor the Model 7365. - Users can change the switch's IP address. - LAN access gives users across the LAN or over the Internet access to control if user network is configured accordingly.
Specifications:PORT CONNECTORS: (3) RJ45 female connectors labeled A, B, and COMMON for each of two channels. FRONT PANEL CONTROL: (1) Manual pushbutton allows local switching. DISPLAY: (2) Front panel LED's display switch position and power status. REMOTE CONTROLS: (1) DB9 (F) connector on rear panel accepts Contact Closure transition signals for Remote Control Operation. (1) RJ45 remote control helicopter (F) connector on rear panel accepts 10/100Base-T LAN Ethernet that 531276856 uses both TELNET commands and a GUI interface for Remote Control operation. POWER: UL approved 120VAC, 60Hz wall mount power module supplies 12 VDC, 500 mA to the unit. DIMENSIONS: Rackmount configuration 19.0" W x 1.75" H x 8.0" D. (48.3 x 4.4 x 20.3 cm) WEIGHT: Approximately 4.5 lbs. (2.0 kg)
Get automobile news and garbage compactor
No comments:
Post a Comment